You found the right spot. It’s an old brick storefront on Broad Street, or a unit in a 1970s strip center. The rent works. The landlord says you can start your build-out next month.
Then your contractor pulls up the old floor tile. Someone asks if it has been tested for asbestos. Work stops. Now you’re paying rent on a space you can’t open, and nobody agrees on who pays to fix it.
This happens more often than you might think in older CSRA buildings. A few questions before you sign can keep it from happening to you.
Why the Age of the Building Matters
Many older commercial buildings in the CSRA were built before 1980. That matters because some building materials from that era can hold hidden hazards.
Asbestos. Asbestos is a natural mineral fiber. It was once common in floor tile, ceiling tile, pipe wrap, drywall joint compound and roofing. It is mostly safe when left alone. It becomes a problem when it is cut, sanded or torn out. That releases fibers you can breathe in. ACM means asbestos-containing material.
Lead paint. Lead-based paint was common in buildings painted before 1978. Sanding or scraping it makes lead dust. The EPA lead page explains the health risks.
Mold history. Georgia and South Carolina are humid. Old roofs leak. Old plumbing drips inside walls. A space can look clean and still have a past water problem behind fresh paint.
Old plumbing and HVAC. Older pipe and duct systems may have asbestos insulation. They may also be the reason a space has had moisture problems.
None of this means an older building is a bad choice. It means you should ask questions before you take on the risk.
Your Build-Out Counts as a Renovation
Here is the part many small business owners don’t know. A tenant build-out in a commercial building is a renovation under federal asbestos rules.
The rule is the asbestos NESHAP. NESHAP stands for National Emission Standards for Hazardous Air Pollutants. The EPA asbestos NESHAP requires an asbestos inspection before renovation or demolition work in a covered building. Commercial buildings are covered. It does not matter who does the work. That includes you, your contractor or the landlord’s crew.
So if you plan to remove walls, replace flooring, open ceilings or move plumbing, the area needs an inspection first. A licensed inspector takes samples of materials that will be disturbed. A lab tests them. Then you know what you are dealing with before work starts.
In Georgia, the Georgia EPD asbestos rules add state steps on top of the federal rule. South Carolina has its own state program too. Some projects also need a notice filed before work begins.
Worker safety rules apply as well. OSHA’s asbestos standards protect the people doing the work. Your contractor has to follow them.
If you want more detail on the rule itself, read our NESHAP-ready asbestos plan for renovations. This post sticks to what it means for your lease.
Who Pays If Asbestos Turns Up Mid Build-Out?
This is the money question. The answer depends on your lease.
Many standard commercial leases put build-out costs on the tenant. Some also say the tenant takes the space “as is.” If the lease is silent on hazards, you may end up paying for abatement. Abatement is the safe removal or sealing of asbestos by a licensed contractor.
You could also pay in other ways:
- Rent while the space sits closed
- A late opening date
- Contractor delay charges
- New design work if a wall or ceiling can’t be touched
That’s why you want the lease to answer this question before you sign. Not after.
Lease Clauses to Ask For
Talk to your attorney about these. They are common asks for a tenant in an older building.
- Landlord disclosure. The landlord shares any known asbestos survey, lead testing or mold reports for the space.
- Pre-existing hazards stay with the landlord. Asbestos, lead or mold that was there before you moved in is the landlord’s to handle and pay for.
- Survey before build-out. An asbestos survey of the work area happens before construction. The lease says who orders it and who pays.
- Rent relief for delays. If a hazard found during build-out stops work, your rent start date moves back.
- A move-in condition record. Test results at move-in become part of the lease file.
You don’t need to win every point. But each one you get shifts real risk off your small business.
Get a Baseline Mold and Air Quality Check at Move-In
Think about the end of your lease, too. When you move out, the landlord inspects the space. If they find mold or water damage, they may try to charge you for it.
A baseline check at move-in protects you. It is a record of the space’s condition on day one. A mold inspection looks for visible growth, moisture and hidden water damage. Air sampling compares indoor mold spore levels with outdoor air. You get a dated report.
If a problem was already there, the report shows it. That gives you proof that you didn’t cause it. It also tells you right away if the space needs cleanup before your staff and customers move in.
The EPA mold guide explains why moisture control is the key to stopping mold. If you manage an office, our post on indoor air quality testing for offices covers what else a test can look at.
Questions to Ask the Landlord
Bring this list to your next walk-through. Ask for answers in writing.
- What year was the building built?
- Has the building ever had an asbestos survey? Can I see it?
- Has any asbestos been removed? Is there a closeout report?
- Has the space been tested for lead paint?
- Have there been roof leaks, floods or plumbing leaks in this unit?
- Has the space ever had mold remediation? Remediation is the cleanup and removal of mold.
- When was the HVAC system last serviced?
- Who pays if a hazard is found during my build-out?
Pay attention to vague answers. “I don’t think so” is not the same as a survey report. And a building updated in the 1990s can still have older materials under the new finishes. Our post on asbestos in buildings renovated in the 90s explains why.
Three Steps to Take Before You Sign
1. Ask for the building’s records. Request any asbestos survey, lead testing, mold reports and leak history. Put that request in writing.
2. Get your own inspection of the work area. If the landlord has no recent survey, have one done on the areas you plan to change. Do it before you sign, or make the lease depend on the results. EnviroPro 360 provides asbestos inspections and testing for commercial spaces.
3. Document the space on day one. Schedule a mold inspection and baseline air sampling at move-in. Keep the report with your lease.
These steps cost far less than a stalled build-out. Call for a quote on testing for your space.
Talk It Through With a Local Team
EnviroPro 360 works with small businesses in Augusta and across the CSRA in Georgia and South Carolina. If you’re looking at an older storefront or office and have questions about asbestos, lead or mold, we’re happy to help you sort it out before you sign. Reach out any time.

